Products
Feb 10, 2012
Check Out 0 items
Order StatusOrder Status
 
Browse
(See All Items)
 

Battle Ready Medieval Swords
High carbon, high quality steel Battle Ready swords can be sharpened for an additional fee. 
[Prev]    1   2

Naumburg Sword


Naumburg Sword

View Larger Image

This rare pommel (type N) exists only on a handful of swords. This sword is taken from a figure of Wilhelm Von Camburg at Naumburg Cathedral and is a must-have medieval sword for any collection. Steel parts, leather wood wrapped grip and tempered high carbon blade come together to make for a fine, nicely proportioned sword. Comes with leather scabbard. Made by Windlass Steelcrafts®. Can be sharpened for additional fee of $18.00.
  • Overall: 38"
  • Blade: 32" long, 2-1/8" wide, 3/16" thick
  • Wt: 2 lbs/12 oz

   Price: $215.00

Calculate Shipping Cost

New Coustille


New Coustille

View Larger Image

The Coustille was developed in an effort to create an all-in-one weapon. Convenient to carry like a dagger but with the cutting power of a short sword, it was long enough to use for defense but still could be thrust under a belt to ride easily with. The well-tempered blade is light and very fast with the cutting power of a short sword. It could pass as a dagger in towns where only nobles could openly carry a sword, making it a favorite for the ne’er do well. Steel pommel and guard with a wood grip covered in leather. Includes scabbard. Made by Windlass Steelcrafts®. Can be sharpened for additional fee of $18.00.
  • Overall: 22"
  • Blade: 16-3/4" long, 2" wide, 3/16" thick
  • Wt: 1 lb/6 oz

   Price: $140.00

Calculate Shipping Cost

Noble's Sword


Noble's Sword

View Larger Image

Men of high station often possessed more than one sword, and it was not unusual for one of them to be of a decorative form. Although intended for formal occasions, it was still very much a fine weapon in its own right. Our offering has highly sculpted solid brass parts with an antiqued finish. High carbon steel blade with a cast grip covered in fine black leather. A beautiful and functional sword. Made by Windlass Steelcrafts®. Includes scabbard. Can be sharpened for additional fee of 18.00.
  • Overall: 36"
  • Blade: 30" long, 1-1/2" wide, 3/16" thick
  • Wt: 2 lbs/6 oz

  
Our Price:$175.00
Compare To:$199.00
You save:$24.00 (12%)

Calculate Shipping Cost

Oakeshott Type IV


Oakeshott Type IV

View Larger Image

This medieval arming, or short sword features a blade that swells slightly at the top to put more weight in the hand to improve its cut and thrust capabilities, making for a very fast sword. The furniture is steel and the grip is wood covered in leather. A very effective and important sword. Includes matching scabbard. Made by Windlass Steelcrafts®. Can be seen in E. Oakeshott's book Record of the Medieval Sword. Can be sharpened for additional fee of $18.00.
  • Overall: 33-3/8"
  • Blade: 26-1/4" long, 2-3/4" wide, 3/16" thick
  • Wt: 2 lbs/14 oz

   Price: $250.00

Calculate Shipping Cost

Oakeshott Type XIIA


Oakeshott Type XIIA

View Larger Image

This sword is a good example of the kind used for civilian carry. Lighter than the battle sword, it excelled in cutting for unarmored combat. The grip is long for two-hand use with a row of studs under the fine leather for a very firm hold. The pommel (type T2) and guard (style 8) are bright brass for easy care. High carbon steel blade is then and tempered to a good spring. Comes with leather scabbard. Made by Windlass Steelcrafts®. Can be sharpened for additional fee of $18.00.
  • Overall: 45-1/4"
  • Blade: 36" long, 2" wide, 3/16" thick
  • Wt: 2 lbs/10 oz

   Price: $250.00

Calculate Shipping Cost

Poignard


Poignard

View Larger Image

A forerunner of many long parrying daggers of later years, its long reach made it very effective. It saw much use in its own day as a backup weapon on the battlefield and was carried at court when swords were forbidden, for they made formidable weapons in the hands of an expert. Includes scabbard. Made by Windlass Steelcrafts®. Can be sharpened for additional fee of $18.00.
  • Overall: 20 1⁄2"
  • Blade: 14 3⁄4" long, 1 3⁄8" wide, 3⁄16" thick
  • Wt: 1 lb/4 oz

   Price: $100.00

Calculate Shipping Cost

Saxon Hilt Sword


Saxon Hilt Sword

View Larger Image

This one-hand cut and thrust sword falls into a class of German swords called Saxon hilts, which were designed with a lower ring filled with an artistically worked metal plate to prevent the intrusion of an opponent's sword tip. A large steel pommel balances the cut and thrust blade very nicely. The guard is also solid steel. Leather covered, grooved wood grip gives a very positive hold. Comes with leather scabbard. Made by Windlass Steelcrafts®.
  • Overall: 41 1/4"
  • Blade: 32 3/4" long, 1 1/2" wide. 3/16" thick
  • Wt: 3 lbs/6 oz

  
Our Price:$175.00
Compare To:$195.00
You save:$20.00 (10%)

Calculate Shipping Cost

Sword of Cortenuova


Sword of Cortenuova

View Larger Image

The long struggle between the German emperors of the Holy Roman Empire and the Italian city states dominated much of the later Middle Ages and the Battle of Cortenuova (where the Germans routed the Italian Lombard League) was one of its largest battles. We have chosen a sword as one that could have been used by either side in that great battle. Brass parts and a leather wrapped wood grip complete this striking one-handed cutting sword. Scabbard included. Made by Windlass Steelcrafts®. Can be sharpened for additional fee of $18.00.
  • Overall: 38-1⁄4"
  • Blade: 32" long, 2-1⁄2" wide, 3⁄16" thick
  • Wt: 3 lbs

   Price: $270.00

Calculate Shipping Cost

Sword of La Bicocca


Sword of La Bicocca

View Larger Image

Although the rapier is strongly associated with the Renaissance, it was generally considered a civilian weapon. An effective cutting sword was more often used by the military and was much preferred in many countries, even by civilians. This offering, circa 1520, is well-balanced and very quick with its jimped steel parts, hardwood and leather grip, and well-tempered high carbon steel blade. Made by Windlass Steelcrafts®. Includes scabbard. Can be sharpened for additional fee of $18.00.
  • Overall: 38-1⁄2"
  • Blade: 32" long, 2" wide, 3⁄16" thick
  • Wt: 3 lbs

   Price: $260.00

Calculate Shipping Cost

Sword of Roven


Sword of Roven

View Larger Image

This sword, circa 1400, has great length giving it both reach and power. As the length increased the velocity increased substantially. However, with the addition of the long ricasso, the sword became even more formidable. The ricasso allowed the sword to be gripped past the guard, thus shortening the sword and allowing it to be used as short spear. This made a thrust more solid since the blade is held securely at two separate points. Our version of this sword is as formidable weapon as the originals. The blade is high carbon steel, tempered to a tough spring, the grip is ridged wood, wrapped with leather, and the pommel and guard are steel. Comes complete with leather scabbard. This is an interesting sword type that belongs in all collections of swords. Made by Windlass Steelcrafts®. Scabbard included. Can be sharpened for additional fee of $18.00.
  • Overall: 48"
  • Blade: 38" long, 1-7/8" wide, 3/16" thick
  • Wt:3 lbs

   Price: $250.00

Calculate Shipping Cost

Two Hand Claymore


Two Hand Claymore

View Larger Image

The remains of this massive Scottish war sword are housed in London's renowned British Museum. The furniture is brass, as with many Highland weapons, to prevent rust in the chronically wet mountain climate. This type of sword would have been carried to the great battlefields where the Scots struggled against their most bitter enemy, the English. In the hands of a brawny highland warrior this would have been a devastating weapon. Hardwood grip accentuates a very attractive sword. High carbon steel fullered blade, ready for an edge. Made by Windlass Steelcrafts®. Includes scabbard. Can be sharpened for additional fee of $18.00.
  • Overall: 47-1⁄2"
  • Blade: 38-1⁄2" long, 1-7⁄8" wide, 3⁄16" thick
  • Wt: 6-1⁄2 lbs

   Price: $299.95

Calculate Shipping Cost

Two Hand Falchion


Two Hand Falchion

View Larger Image

This massive sword is a marriage of the typical one-hand Falchion and the earlier, long wood-gripped Medieval Choppers. The big blade is capable of shearing blows and has a wicked stabbing point. Steel parts and a wood grip wrapped in leather cord. Surprisingly light and fast for its size. Made by Windlass Steelcrafts®. No scabbard available. Can be sharpened for additional fee of $18.00.
  • Overall: 35-5⁄8"
  • Blade: 26-1⁄2" long, 2-1⁄2" wide, 3⁄16" thick
  • Wt: 3 lbs/4 oz

  
Our Price:$199.95
Compare To:$215.00
You save:$15.05 (7%)

Calculate Shipping Cost

Venetian Sword


Venetian Sword

View Larger Image

In 1478, when the trade centers in the Balkans of the Italian city-state Venice came under attack from the Ottoman Turks, the conflict centered at the fortified town of Shkoder in Albania. The town first suffered a heavy bombardment from the Turkish cannons. The turks twice launched assaults against the badly battered walls, but both times the Venetians beat them back. Finally the Turks admitted defeat and withdrew. After the battles, less than 500 men marched safely out of the town. We have named this impressive Italian sword for the Venetians who fought that equally impressive siege. The highly worked steel parts and the twisted wire-over-wood grip nicely balance the deadly fullered well-tempered high carbon steel blade. Comes complete with a scabbard. Made by Windlass Steelcrafts®. Original is pictured in “Armi Bianche Italiane”.
  • Overall: 39-1⁄4"
  • Blade: 32" long, 2-1⁄8" wide, 3⁄16" thick
  • Wt: 3 lbs

  
Our Price:$145.00
Compare To:$245.00
You save:$100.00 (41%)

Calculate Shipping Cost

Wallace Claymore


Wallace Claymore

View Larger Image

The great Scottish hero, William Wallace, and his band of lowlanders routed a superior English force of 50,000 at Stirling Castle in 1297. In his ongoing challenge of Edward I, he also laid waste to several counties in the north of England. These early attacks inspired Scottish Nationalism that culminated with the achievement of independence under Robert The Bruce. This two-hand sword has a well tempered high carbon steel blade with steel parts and a wood grip wrapped with cord and leather. Made by Windlass Steelcrafts®. Comes without scabbard. Can be sharpened for additional fee of $18.00.
  • Overall-59"
  • Blade: 46-1⁄2" long, 2" wide, 3⁄16" thick
  • Wt: 5 lbs

   Price: $299.95

Calculate Shipping Cost

[Prev]    1   2

 

 

"We proudly accept all major credit cards on our secured site."